TL;DR
A push-fit fitting is a plumbing connector that joins copper, CPVC, or PEX by simply pushing the pipe past an internal stainless gripper ring onto an O-ring seal, with no soldering, glue, or crimping tools. Brands like SharkBite are listed for permanent, in-wall use when installed correctly, though many plumbers reserve them for repairs and accessible locations.
What it means
A push-fit fitting is a plumbing connector that joins copper, CPVC, or PEX by simply pushing the pipe past an internal stainless gripper ring onto an O-ring seal, with no soldering, glue, or crimping tools. Brands like SharkBite are listed for permanent, in-wall use when installed correctly, though many plumbers reserve them for repairs and accessible locations. Full pipe insertion to the marked depth—and a deburred, clean pipe end—decides whether the joint holds.
Where it sits in the glossary
Push-fit fitting is part of the Trade jargon group inside the ProFix Directory glossary. Browse every term in this category from the glossary index.
Why Ohio homeowners should know it
This is a term Ohio homeowners encounter when reading contractor quotes, hiring paperwork, or inspection reports. Understanding it well enough to ask one good follow-up question is usually all the protection a homeowner needs.
ProFix Directory keeps definitions short on the index page and saves the longer context — Ohio-specific rules, where the term comes from, and which ProFix tools touch it — for these per-term pages so the term is easy to cite and easy to share.
ProFix tools that touch this term
See also
License: CC-BY-4.0 — quote freely with attribution to ProFix Editorial Team / ProFix Directory.