Safety and Insurance Checklist for Roofers

PPE requirements

Roofers should arrive with PPE selected for roofing work. Expect ANSI-rated eye protection, material-specific gloves, durable boots, hearing protection when saws, grinders, compressors, pumps, or impact tools are used, and head protection where overhead work or suspended materials are present. For this trade, the higher-signal gear is full-body harness, lanyard, lifeline, and anchor when personal fall arrest is used, soft-soled roofing boots with traction, and cut gloves, eye protection, and heat protection around kettles or torches. Crews should keep respirators fit-tested when work can create dust, mold, lead, asbestos, solvent mist, refrigerant vapor, sewage aerosol, pesticide exposure, or other airborne hazards; a loose disposable mask is not a substitute for an assigned respirator. PPE should match the task on that day: tear-off, underlayment, flashing, steep-slope work, low-slope work, skylights, ladders, and material staging. Ask how the supervisor decides when to upgrade from ordinary gloves and glasses to face shields, arc-rated clothing, fall arrest, chemical cartridges, or mechanical ventilation.

OSHA standards

The main OSHA references for roofers are 29 CFR 1926 Subpart E (PPE), including 1926.95, 1926.100, 1926.102, and 1926.103; 29 CFR 1910.1200 (hazard communication); 29 CFR 1926 Subpart I (tools), including 1926.300 and 1926.302; 29 CFR 1926 Subpart M (fall protection), including 1926.501, 1926.502, and 1926.503; 29 CFR 1926 Subpart X (stairways and ladders), including 1926.1051 and 1926.1053; 29 CFR 1926.1101 (asbestos) and 29 CFR 1926.62 (lead) when legacy materials are disturbed. Hazard communication under 29 CFR 1910.1200 matters when cleaners, coatings, adhesives, refrigerants, pesticides, fuels, silica-containing dust, or other chemicals are used. Respirator use should connect to 29 CFR 1910.134 or 29 CFR 1926.103 when required. Roofing safety begins with fall planning before materials arrive. Crews should select guardrails, safety nets, personal fall arrest, warning lines, safety monitors where allowed, or a compliant plan for specific residential conditions. Ladders, hoists, skylight openings, weather, and falling objects need controls. Work 6 feet or more above lower levels brings 29 CFR 1926.501 through 1926.503 into fall planning; ladders and scaffolds can add 29 CFR 1926 Subpart X or Subpart L. A credible roofer should be able to name the competent person or qualified worker for the risky part of the job, describe training, identify written plans or permits, and explain how hazards are isolated before work starts.

Insurance minimums

Do not treat any number here as a legal minimum. Insurance and bonding minimums vary by state, city, license classification, contract, payroll, subcontractor use, and whether the pro has employees. For roofers, many residential customers and general contractors commonly ask for commercial general liability around the $1M per occurrence / $2M aggregate range; higher-risk roof, tree, structural, utility, fire-protection, solar, pool, well, septic, or environmental work may be underwritten at $2M to $5M or more. Roofing is commonly one of the more restricted insurance classes; verify that the certificate does not exclude roofing, torch-applied roofing, subcontracted labor, or work above a stated height. Ask for a current certificate that names the actual trade operations and does not exclude the work you are hiring. Workers' compensation is normally required when state law and worker status trigger it; owners, LLC members, family businesses, and subcontractors may be treated differently by state. Verify active status with the state workers' comp agency when possible. Bonding is separate: license, permit, right-of-way, performance, or payment bonds may be required by a state board, municipality, utility, or prime contract. For state-specific licensing and bonding context, use /license/roofing-license-in-{state}; replace {state} with the two-letter code, such as /license/roofing-license-in-oh.

State example: Roofer license and bonding context in Ohio. Replace the state code in the URL for another state.

Hazard awareness

Roofers can create hazards that are easy to miss because the work often happens in familiar rooms, yards, garages, roofs, attics, crawlspaces, or driveways. Hazards include falls through edges and skylights, ladder movement, brittle decking, heat stress, nail punctures, falling shingles, torch or kettle fire, silica or asphalt dust, asbestos in old roofing, and storm-damaged structures. Older homes add special concerns: pre-1978 paint can trigger lead controls, legacy materials can be asbestos suspect, and plaster, concrete, brick, mortar, stone, or fiber-cement cutting can trigger respirable crystalline silica controls. Noise, heat, poor lighting, awkward access, sharp debris, temporary cords, weather, and occupant traffic can turn a routine job into a high-risk setup. Good contractors perform a short job-hazard review before tools are unloaded, isolate the work area, preserve emergency shutoffs and exits, use ventilation or wet methods when exposure could spread, and document surprises.

Verification questions

Before approving the estimate, ask direct questions. Who is the safety lead, competent person, or qualified worker for this job? Which OSHA standards or company procedures govern the highest-risk task? What PPE, containment, ventilation, fall protection, lockout, traffic control, or excavation protection will be used at my property? Can you send current insurance, workers' compensation proof or exemption, and any required bond? What conditions will make the crew stop work and call me before continuing? For roofers, add: What fall-protection method will be used on each roof plane?, How are anchors installed, inspected, and removed or left in place?, and How will debris, nails, skylights, weather changes, and public access be controlled?. Listen for task-specific answers, not slogans. A contractor who explains limits, exclusions, and stop-work triggers is usually safer than one who says every job is routine. Keep the answers with the signed estimate.