⚡ TodayCall: Electricians

No power in Strongsville, OH

Dead outlets, room without power, or breaker that won't reset. Most often a tripped breaker; sometimes a service-side outage (utility) or a serious electrical fault.

Step-by-step response

  1. 1
    Check if it's just you

    Look at neighbors' houses + streetlights. If they're dark too, call the utility. Toledo metro = Toledo Edison 1-888-544-4877. Findlay metro = AEP Ohio 1-800-672-2231.

  2. 2
    Check for tripped breakers

    Open your panel. Look for a breaker that's centered (between ON and OFF) — that's tripped. Flip fully OFF then back ON to reset. If it stays on: fixed.

  3. 3
    Check GFCI outlets

    Bathroom, kitchen, garage, outdoor outlets are usually GFCI-protected. A tripped GFCI takes out the whole circuit. Press the small RESET button on the GFCI outlet; you'll hear/feel a click.

  4. 4
    If breaker keeps tripping — STOP

    Don't reset more than once. Repeated trips can melt wiring + start a fire. Call an electrician same-day. Common causes: short circuit, ground fault, overloaded circuit, aging breaker.

  5. 5
    Burning smell or warm panel?

    Cut the main breaker (top of panel) immediately. Call an electrician now, not tomorrow. Federal Pacific or Zinsco panels (1960s-1980s) have a known fire-risk pattern — replacement is $1,800-3,200.

Verified electricians serving Strongsville, OH

Filter pros
Showing all 6 pros

Kite Electric Ohio LLC

Electrician · Strongsville, OH
5.0(54 reviews)
EV charger

"Always on time with scope of work explained and what to expect when finished. Price is very exceptional in comparison to others I've used in past with the job done as priced."

View pro & call →

Dependable Electric

Electrician · Strongsville, OH
3.3(7 reviews)

"Came out when they said they’ll be here and got the work done quickly. Staff was super nice and helpful. Will be using them again"

View pro & call →
See all 13 electricians →

Frequently asked

Why won't my breaker reset?

Either there's still a fault on the circuit, the breaker itself failed, or the panel has lost its bus connection. All three need an electrician — don't try to force a reset.

Should I worry about my old fuse box?

Pre-1965 fuse boxes are often 60A and undersized for modern loads. They're not inherently dangerous if intact, but most insurance carriers will require an upgrade to 100A+ before renewal. Plan a panel swap ($1,800-3,200).

Local context — Strongsville, OH

Southwest Cleveland suburb with large 1970s-2000s subdivisions and heavy finished-basement inventory. Homeowner demand clusters around generator hookups, backup sump systems, and HVAC replacement in larger all-season family homes.

Emergency